Bilovit Metal wick holders – 100 pieces
- Set of 100 pieces – enough for many projects, from single candles to larger batches in a craft workshop.
- Galvanised steel – resistant to the high temperature of molten wax and durable when working with larger numbers of candles.
- No warping during pouring – the plate retains its shape, so the wick does not tilt after the mould has been filled.
- Stable wick positioning – the wick stands upright at the bottom of the mould throughout the entire pouring process, which promotes even burning of the candle.
- Ready to use – no additional preparation required; simply insert the wick and press the clamps into place.
Zamów do 14:00, wyślemy jutro
Free delivery on orders over 99 PLN
Fast dispatch within 24 hoursBilovit metal wick holderscome ina setof 100 piecesmadefromgalvanised, heat-resistant steel. The platesdo not warp when hot wax is poured over themandensure the wick is securely held in place within the candle. They areready to use, with no further preparation required.
The foundation of every candle, quite literally
Wick holders — simply referred to as ‘plates’ in workshops — are an element you only remember when you make your first failed candle. Without a holder, the wick tilts during pouring and burns unevenly; by the end of the burn, it may even lie flat on the bottom of the container. A plate clamped onto the wickholds it upright at the bottom of the mould throughout the entire pouring processandpromotes even burning of the candle. The set contains100 pieces, which is sufficient for everything from individual projects to entire batches in a craft workshop.
Material – galvanised, heat-resistant steel
Package contents – 100 pieces
Wick fitting – hole with clamps to secure the wick
Intended use – candles cast in vessels and moulds
Product type – home accessories
What are candle holders used for:
Securing the wick before pouring wax into the mould
Keeping the wick vertical at the bottom of the container or mould throughout the entire casting process
Casting scented and decorative candles yourself
Workshop use and larger batches of candles in a craft studio
How to use:
1. Thread the end of the wick through the hole in the holder.
2. Press the clamps together so that the wick is securely held in place and does not slip out.
3. Place the prepared wick in the centre of the bottom of the container or mould.
4. Position the top end of the wick vertically – this is easiest using a stabiliser resting on the rim of the container.
5. Pour hot wax into the mould and wait until it has set completely.
6. Trim the wick to the desired height. The holder remains permanently in the candle.
Material: galvanised steel — resistant to the high temperatures of molten wax and durable when used with a large number of candles
Storage: Store in a dry place, preferably in a sealed container. Protect from moisture.
Precautions:
The base remains in the finished candle – do not attempt to remove it from the set wax.
The edges of the metal plates and clamps may be sharp – take care when clamping the wick.
Keep out of reach of children – small parts.
Never leave a burning candle unattended.
100% natural
No water, no unnecessary additives
Straight from the manufacturers
No middlemen
Dispatched within 24 hours
Free delivery on orders over 99 zł
